H2 V8-6.2L (2008)
bulletin before customers take possession of these vehicles.
Dealers are to service all vehicles subject to this recall at no charge to customers, regardless of mileage, age of vehicle, or ownership, from this time
forward.
Customers who have recently purchased vehicles sold from your vehicle inventory, and for which there is no customer information indicated on the
dealer listing, are to be contacted by the dealer. Arrangements are to be made to make the required correction according to the instructions contained in
this bulletin. A copy of the customer letter is shown in this bulletin for your use in contacting customers. Recall follow-up cards should not be used for
this purpose, since the customer may not as yet have received the notification letter.
In summary, whenever a vehicle subject to this recall enters your vehicle inventory, or is in your dealership for service in the future, you must take the
steps necessary to be sure the recall correction has been made before selling or releasing the vehicle.
Disclaimer
Service Procedure
Important:
See the Vehicles Involved section of this bulletin to determine the service required for each individual vehicle.
Wire Repair (use only if applicable - refer to the Vehicles Involved section of this bulletin)
1.
Hook up the Tech 2 to the vehicle.
1.1.
Capture the DTCs, if required.
1.2.
Clear the DTCs, if required.
1.3.
Ensure that there are no DTCs present before proceeding to Step 2.
2.
Lift and support the vehicle. Refer to Lifting and Jacking the Vehicle in SI.
