H2 V8-6.2L (2008)
9. Apply threadlock to the threads of the bracket bolts. Refer to Sealers, Adhesives, and Lubricants (See: Specifications/Sealers, Adhesives, and
Lubricants) for the correct part number.
10. Install the ignition coils and bracket to the rocker arm cover.
11. Install the ignition coil bracket studs to the rocker cover.
Tighten the studs to 12 N.m (106 lb in).
12. Install the heater hose bracket and nut.
Tighten the nut to 9 N.m (80 lb in).
13. Position the surge tank/heater hoses to the heater hose bracket.
14. Install the spark plug wires to the ignition coils.
15. Re-position the engine harness.
16. Install the harness clips (1).
17. Connect the main electrical connector (4) feeding the ignition coils.
18. Install the CPA lock (5).
19. Install the engine sight shield. Refer to Upper Intake Manifold Sight Shield Replacement (6.0L (LQ4)) (See: Intake Manifold/Service and
Repair/Upper Intake Manifold Sight Shield Replacement) .
