H2 V8-6.2L (2008)
8. Install the lower part of the cover (1).
9. With the cover (2) off, use the fuse location information to install all fuses and relays.
10. Install the cover.
11. Install the fender upper brace.
12. Install the 4 fender upper brace bolts.
Tighten the 4 retaining bolts to 25 N.m (18 lb ft).
13. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and Charging/Battery/Battery
Cable/Service and Repair/Battery Negative Cable Disconnection and Connection) .
14. Start vehicle and ensure all components function properly.
