H2 V8-6.2L (2008)
Seat Belt Buckle: Service and Repair
Front Seat Belt Buckle Replacement
Front Seat Belt Buckle Replacement
Removal Procedure
1. Remove the front seat belt buckle nut (1).
Disconnect the electrical connection (2). The right seat buckle is shown, the left is similar.
2. Remove the seat belt buckle from the vehicle.
Installation Procedure
1. Install the seat belt buckle in the vehicle.
2. Connect the electrical connection (2).
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
3. Install the front seat belt buckle nut (1).
Tighten the nut to 53 N.m (39 lb ft).
