H2 V8-6.2L (2008)
Control Arm: Service and Repair
Rear Suspension
Rear Axle Upper Control Arm Replacement
Rear Axle Upper Control Arm Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance) .
2. Disconnect the air suspension level sensor, if equipped. Refer to Air Spring Leveling Sensor Replacement (See: Suspension Control ( Automatic -
Electronic )/Service and Repair/Removal and Replacement/Air Spring Leveling Sensor Replacement) .
3. Support the rear axle at the ride height.
4. Remove the upper control arm retaining nut and bolt from the frame bracket.
5. Remove the upper control arm retaining nut and bolt from the axle bracket.
6. Remove the upper control arm.
Installation Procedure
1. Install the upper control arm.
2. Install the upper control arm retaining bolt and nut to the axle bracket.