H2 V8-6.2L (2008)
Suspension Strut / Shock Absorber: Service and Repair
Rear Suspension
Shock Absorber Replacement
Shock Absorber Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance) .
2. Support the rear axle.
3. Disconnect the air suspension level sensor (if equipped). Refer to Air Spring Leveling Sensor Replacement (See: Suspension Control ( Automatic
- Electronic )/Service and Repair/Removal and Replacement/Air Spring Leveling Sensor Replacement) .
4. Remove the upper shock absorber nut and the bolt.
5. Remove the lower shock absorber nut and the bolt.
6. Remove the shock absorber.
Installation Procedure