H2 V8-6.2L (2008)
Shift Interlock Solenoid: Service and Repair
Automatic Transmission Shift Lock Actuator Replacement
Removal Procedure
Important: After assembling the shift lock actuator, turn the ignition forward but do not start (auxiliary position) and attempt to pull the
lever from PARK with and without the brake pedal depressed to verify there is no gear access without the brake pedal depressed.
Important: Ensure the key cannot be removed from the ignition unless both the shifter is in PARK and the shift knob button has been
depressed.
1. Remove the console. Refer to Front Floor Console Replacement (See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Front Floor Console Replacement) .
2. Disconnect the shift lock actuator electrical connector (3).