H2 V8-6.2L (2008)
2. Disconnect the windshield solvent heater module wire harness (1) from the heater module (2).
3. Connect the jumper harness with the in-line fuse (1) to the windshield solvent heater module wire harness (2) as shown in the illustration.
4. Connect the other end of the jumper harness into the connector (1) at the windshield solvent heater module.
5. Ensure that the jumper harness and windshield solvent heater module wire harness are routed and secured properly.
6. For vehicles that previously had the 60 amp heated windshield washer fuse removed, retrieve the fuse from the glove compartment and reinstall the