H2 V8-6.2L (2008)
Windshield Washer Pump: Service and Repair
Washer Pump Replacement
Removal Procedure
1. Remove the washer solvent container. Refer to Windshield Washer Solvent Container Replacement (See: Windshield Washer Reservoir/Service
and Repair) .
2. Remove the washer pump from the washer solvent container by gently prying the pump from the container using 2 flat-bladed tools.
3. Remove the washer pump.
4. Discard the washer pump grommet.
Installation Procedure
1. Install a new washer pump grommet into the container.
2. Lubricate the washer pump pickup with clean washer solvent.
3. Install the washer pump in the washer solvent container - gentle pressure is required.
4. Install the washer solvent container (5). Refer to Windshield Washer Solvent Container Replacement (See: Windshield Washer Reservoir/Service
and Repair) .