H2 V8-6.2L (2008)
1. Position the rear wiper motor (4) into place in the liftgate (2).
2. Install the fasteners retaining the wiper motor (4), but do not tighten.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
3. Install the weatherseal (4) and the rear wiper arm nut (3).
Tighten the rear wiper arm nut to 6 N.m (4 lb ft).
4. Tighten the rear wiper motor fasteners.
Tighten the rear wiper motor fasteners to 9 N.m (7 lb ft).
5. Connect rear wiper motor electrical connectors.
6. Install the rear wiper motor control module.
7. Install the liftgate trim panel. Refer to Liftgate Trim Panel Replacement (SUV) (See: Body and Frame/Doors, Hood and Trunk/Trunk /
Liftgate/Trunk / Liftgate Interior Trim Panel/Service and Repair/Liftgate Trim Panel Replacement (SUV)) d.
8. Install the beauty cover (1).
9. Install the rear wiper arm. Refer to Rear Window Wiper Arm Replacement (See: Wiper Arm/Service and Repair/Rear Window Wiper Arm
Replacement) .
