H3 L5-3.7L (2007)
Important: Install 2 new copper brake hose gaskets.
1. Assemble the 2 new copper brake hose gaskets, and the brake hose bolt to the brake hose.
Notice: Refer to Fastener Notice.
2. Install the brake hose bolt and 2 new washers to the brake caliper.
Tighten the bolt to 40 N.m (30 lb ft).
Important: The hose must not be twisted. Make sure the hose is not in contact with any suspension component.
3. With the weight of the vehicle on the suspension, install the brake hose, the bracket, and brake hose bolt to the upper control arm.
Tighten the bolt to 9 N.m (80 lb in).
