H3 L5-3.7L (2007)
Canister Purge Solenoid: Service and Repair
Evaporative Emission Canister Purge Solenoid Valve Replacement
Removal Procedure
1. Raise and support the vehicle only high enough to access the evaporative emission (EVAP) canister purge solenoid valve through the wheelhouse.
Refer to Vehicle Lifting.
2. Remove the left wheelhouse liner.
3. Disconnect the EVAP purge solenoid line quick connect (4) from the purge solenoid valve.
4. Disconnect the EVAP purge line (1) from the purge solenoid valve.