H3 L5-3.7L (2007)
Notice: Refer to Fastener Notice.
2. Install a torque wrench (5) to the J 34028 to tighten the inner tie rod (6).
Hold the rack while tightening the tie rod as shown.
Tighten the inner tie rod to 88N.m (65 lb ft).
3. Stake the inner tie rod (2) at the location (1) with a hammer and punch.
4. Install the rack and pinion boot.
5. Install the tire and wheel assembly.
6. Lower the vehicle.
7. Check the wheel alignment. Refer to Measuring Wheel Alignment.
