H3 L5-3.7L (2007)
Torsion Bar: Service and Repair
Torsion Bar Replacement
Removal Procedure
Notice: Use care when handling the torsion bars in order to avoid chipping or scratching the coating. Damage to the coating will result in
premature failure of the torsion bars.
1. Raise and support the vehicle. refer to vehicle lifting.
2. Allow the front suspension to hang in the rebound position.
3. Mark the adjuster bolt.
Important: To aid in re-assembly record the number of turns that are required to remove the adjuster bolt.
4. Remove the adjuster bolt, spacer and adjuster nut.
Important: Take note that the torsion bars are specific to the left and right sides of the vehicle.
