H3 L5-3.7L (2007)
Wheels: All Technical Service Bulletins
Tires/Wheels - Refinishing Aluminum Wheels
INFORMATION
Bulletin No.: 99-08-51-007D
Date: January 14, 2010
Subject: Refinishing Aluminum Wheels
Models:
2010 and Prior Passenger Cars and Trucks (Including Saturn)
2003-2010 HUMMER H2
2006-2010 HUMMER H3
2005-2009 Saab 9-7X
Supercede:
This bulletin is being revised to add additional model years and remove one outside company reference. Please discard Corporate Bulletin Number
99-08-51-007C (Section 08 - Body and Accessories).
This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending,
straightening or re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed.
Evaluating Damage
In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such
damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any
wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same
vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility
- Outside Company later in this bulletin.
Aluminum Wheel Refinishing Recommendations
-
Chrome-plated aluminum wheels
Re-plating these wheels is not recommended.
-
Polished aluminum wheels
These wheels have a polyester or acrylic clearcoat on them. If the clearcoat is damaged, refinishing is possible. However, the required refinishing
process cannot be performed in the dealer environment. Refer to Refinisher's Responsibility - Outside Company later in this bulletin.
-
Painted aluminum wheels
These wheels are painted using a primer, color coat, and clearcoat procedure. If the paint is damaged, refinishing is possible. As with polished
wheels, all original coatings must be removed first. Media blasting is recommended. Refer to GM Aluminum Refinishing Bulletin #53-17-03A for
the re-painting of this type of wheel.
-
Bright, machined aluminum wheels
These wheels have a polyester or acrylic clearcoat on them. In some cases, the recessed "pocket" areas of the wheel may be painted. Surface
refinishing is possible. The wheel must be totally stripped by media blasting or other suitable means. The wheel should be resurfaced by using a
sanding process rather than a machining process. This allows the least amount of material to be removed.
Important
Do not use any re-machining process that removes aluminum. This could affect the dimensions and function of the wheel.
Painting is an option to re-clearcoating polished and bright machined aluminum wheels. Paint will better mask any surface imperfections and is
somewhat more durable than clearcoat alone. GM recommends using Corsican SILVER WAEQ9283 for a fine "aluminum-like" look or Sparkle
SILVER WA9967 for a very bright look. As an option, the body color may also be used. When using any of the painting options, it is recommended that
all four wheels be refinished in order to maintain color uniformity. Refer to GM Aluminum Refinishing Bulletin #53-17-03A for specific procedures and
product recommendations.
Refinisher's Responsibility - Outside Company
Important
Some outside companies are offering wheel refinishing services. Such refinished wheels will be permanently marked by the refinisher and are
warranted by the refinisher. Any process that re-machines or otherwise re-manufactures the wheel should not be used.
A refinisher's responsibility includes inspecting for cracks using the Zyglo system or the equivalent. Any cracked wheels must not be refinished. No
welding, hammering or reforming of any kind is allowed. The wheel ID must be recorded and follow the wheel throughout the process in order to assure
that the same wheel is returned. A plastic media blast may be used for clean up of the wheel. Hand and/or lathe sanding of the machined surface and the
