H3 L5-3.7L (2007)
Constant Velocity Joint: Service and Repair
Wheel Drive Shaft Inner Joint and Seal Replacement
Wheel Drive Shaft Inner Joint and Seal Replacement
Tools Required
*
J 35566 Drive Axle Seal Clamp Pliers
*
J 35910 Drive Axle Seal Clamp Pliers
*
J 8059 Snap Ring Pliers - Parallel Jaw
Removal Procedure
1. Remove the wheel drive shaft.
Important: Before placing the driveshaft in a vise, place protective covers over the vise jaws.
2. Place the driveshaft in a vise.