hummer Workshop Repair Guides

Hummer Workshop Service and Repair Manuals

ABOUT US
Wheel Drive Shaft Inner Joint and Seal Replacement|Page 11202 > < Wheel Drive Shaft Inner Joint and Seal Replacement|Page 11200

H3 L5-3.7L (2007)

Page 5
background image

15. Install a new large retaining clamp. Crimp the large retaining clamp using the pliers J 35566 (1).

Tighten the large retaining clamp to 176 N.m (130 lb ft).

16. Fully stroke the D/O joint several times to disperse the grease.
17. Install the wheel drive shaft. 

Wheel Drive Shaft Inner Joint and Seal Replacement|Page 11202 > < Wheel Drive Shaft Inner Joint and Seal Replacement|Page 11200