H3 V8-5.3L (2008)
3. Remove the right front brake pipe from the brake master cylinder.
Cap the brake pipe fittings and plug the master cylinder outlet ports to prevent brake fluid loss and contamination.
4. Disconnect the electrical connectors at the brake pressure modulator valve (BPMV).
5. Disconnect the electrical connector for the fluid level sensor.
6. Remove the knee bolster. Refer to Driver Knee Bolster Replacement (Left Hand Drive) (See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Driver Knee Bolster Replacement (Left Hand Drive))Driver Knee Bolster Replacement
(Right Hand Drive) (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Driver Knee Bolster
Replacement (Right Hand Drive)) .
7. Remove the knee bolster bracket. Refer to Driver Knee Bolster Bracket Replacement (Left Hand Drive) (See: Body and Frame/Interior Moulding
/ Trim/Dashboard / Instrument Panel/Service and Repair/Driver Knee Bolster Bracket Replacement (Left Hand Drive))Driver Knee Bolster
Bracket Replacement (Right Hand Drive) (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Driver Knee Bolster Bracket Replacement (Right Hand Drive)) .
8. Remove the retainer from the clevis pin.
9. Remove the clevis pin from the master cylinder push rod and the brake pedal.
