H3 V8-5.3L (2008)
11. Remove the power brake booster pump bolts (1).
12. Remove the power brake booster pump (2).
Important: DO NOT reuse the retainer ring. Replace with a NEW retainer ring.
13. Remove the retainer ring (3) on the mounting bracket (4) by breaking the retaining ring.
14. Remove the mounting bracket (4).
15. If damaged, replace the dampers (5) and (6).
Installation Procedure
1. Install the dampers (5) and (6), if removed.
2. Install the mounting bracket (4) on the power brake booster pump (2).
3. Install a NEW retainer ring (3).
4. Install the power brake booster pump.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
