H3 V8-5.3L (2008)
the mounting nuts for the brake master cylinder assembly.
10. Remove the nuts for the brake master cylinder (2).
11. Remove the brake master cylinder and power brake booster assembly (1).
Installation Procedure
1. Install the brake master cylinder and power brake booster assembly (1).
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the master cylinder nuts (2).
Tighten the nuts to 27 N.m (20 lb ft).
3. Install the clevis pin to the master cylinder push rod and the brake pedal.
4. Install the retainer to the clevis pin.