H3 V8-5.3L (2008)
Camshaft: Service and Repair
Camshaft Replacement
Special Tools
*
EN 46330 Timing Belt Tensioner Retaining Pin
*
EN 46330 Angle Meter
Removal Procedure
1. Remove the condenser. Refer to Condenser Replacement (See: Heating and Air Conditioning/Condenser HVAC/Service and Repair) .
2. Remove the engine front cover. Refer to Engine Front Cover Replacement (See: Timing Components/Timing Cover/Service and Repair) .
3. Remove all of the valve lifters. Refer to Valve Lifter Replacement (See: Lifter / Lash Adjuster/Service and Repair) .
4. Remove the camshaft sensor bolt and sensor.