H3 V8-5.3L (2008)
1. Install the coolant heater cord to the vehicle.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Position the coolant heater cord clip to the frame and install the coolant heater cord bolt.
Tighten the bolt to 8 N.m (71 lb in).
3. Raise the vehicle.
4. Install the coolant heater cord clip to the power steering gear outlet hose.
5. Install the coolant heater cord clip to the engine harness channel.
6. Connect the coolant heater cord electrical connector.
7. Position and install the oil pan skid plate. Refer to Oil Pan Skid Plate Replacement (See: Body and Frame/Frame/Skid Plate/Service and
Repair/Oil Pan Skid Plate Replacement) .
8. Lower the vehicle.
