hummer Workshop Repair Guides

Hummer Workshop Service and Repair Manuals

Exhaust Pipe Gasket|Service and Repair|Page 3236 > < Muffler Replacement (EQ9/NA3)|Page 3231
Page 1
background image

Exhaust Pipe Gasket: Service and Repair

Exhaust Seal Replacement (LH8)

Removal Procedure
Caution:
  Refer to Exhaust Service Caution  (See: Service Precautions/Exhaust Service Caution) .
Caution:  Refer to Protective Goggles and Glove Caution  (See: Service Precautions/Technician Safety Information/Protective Goggles and Glove
Caution) .

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle  (See: Maintenance/Vehicle Lifting/Service and Repair) .
2. If removing the left side seal, remove the catalytic converter to exhaust manifold nuts (1).
3. Position the catalytic converter rearward enough in order to allow clearance to remove the seal.
4. Remove and discard the exhaust manifold seal (2).

5. If removing the right side seal, remove the catalytic converter to exhaust manifold nuts (2).
6. Position the catalytic converter rearward enough in order to allow clearance to remove the seal.

Exhaust Pipe Gasket|Service and Repair|Page 3236 > < Muffler Replacement (EQ9/NA3)|Page 3231