H3 V8-5.3L (2008)
Parking Brake Warning Switch: Service and Repair
Parking Brake Indicator Switch Replacement (LHD)
Parking Brake Indicator Switch Replacement (LHD)
Removal Procedure
Caution: Refer to Battery Disconnect Caution .
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and
Charging/Battery/Battery Cable/Service and Repair) .
2. Remove the MID-bussed electrical center from the bracket.
3. Disconnect the park brake warning lamp switch electrical connector.
4. Remove the park brake warning lamp switch mounting bolt.
5. Remove the park brake warning lamp switch.
Installation Procedure