H3 V8-5.3L (2008)
Fluid - M/T: Service and Repair
Transmission Fluid Replacement
Draining Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Vehicle Lifting/Service and Repair) .
2. Clean away all dirt and debris from the transmission fluid drain plug area.
3. Position an appropriate container under the transmission.
4. Remove the transmission fluid drain plug and washer.
Discard the washer.
Allow the transmission fluid to drain into the container.
Notice: Refer to Component Fastener Tightening Notice (See: Service Precautions/Vehicle Damage Warnings/Component Fastener Tightening
Notice) .
5. Install the transmission fluid drain plug and NEW washer.
Tighten the drain plug to 37 N.m (27 lb ft).
6. Remove the container used to catch the used transmission fluid from under the vehicle.
Filling Procedure
