H3 V8-5.3L (2008)
6. Carefully lift at each side of the underhood accessory wiring junction block assembly in order to release the underhood accessory wiring junction
block assembly from the 3 main body harness connectors (1) and exposing the lower connectors.
7. Remove the underhood accessory wiring junction block assembly from the vehicle.
Important: Using a hook-type tool, as shown, re-stage all 3 lower harness connectors into the lower base prior to installing the new
underhood accessory wiring junction block assembly.
8. Use the hook tool to pull the connector (1) upward in order to secure the connectors into the base.
Installation Procedure
