H3 V8-5.3L (2008)
Important:: The embossed arrow on the MAF/IAT sensor indicates the proper air flow direction. The arrow must point toward the engine.
1. Install the MAF/IAT sensor (2) to the air cleaner upper housing.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the MAF/IAT sensor screws (1).
Tighten the screws to 1.5 N.m (13 lb in).
3. Connect the engine wiring harness electrical connector to the MAF/IAT sensor.