H3 V8-5.3L (2008)
Fuel Line Coupler: Service and Repair
Metal Collar Quick Connect Fitting Service
Metal Collar Quick Connect Fitting Service
Tool Required
J 37088-A Fuel Line Disconnect Tool Set
Removal Procedure
Caution: Refer to Gasoline/Gasoline Vapors Caution (See: Fuel/Service Precautions) .
1. Relieve the fuel system pressure before servicing any fuel system connection. Refer to the Fuel Pressure Relief (With CH 48027) (See: Fuel
Filter/Fuel Pressure Release/Service and Repair/Fuel Pressure Relief (With CH 48027))Fuel Pressure Relief (Without CH 48027) (See: Fuel
Filter/Fuel Pressure Release/Service and Repair/Fuel Pressure Relief (Without CH 48027)) .
2. Remove the retainer from the quick-connect fitting.
Caution: Wear safety glasses when using compressed air, as flying dirt particles may cause eye injury.
3. Blow dirt out of the fitting using compressed air.
4. Choose the correct J 37088-A for the size of the fitting. Insert the J 37088-A into the female connector, then push inward in order to release the
locking tabs.
5. Pull the connection apart.