H3 V8-5.3L (2008)
Fuel Level Sensor: Service and Repair
Fuel Level Sensor Replacement
Removal Procedure
1. Remove the fuel tank module. Refer to Fuel Tank Fuel Pump Module Replacement (See: Fuel Delivery and Air Induction/Fuel Pump/Service and
Repair) .
2. Disconnect the fuel level sensor electrical connector (1) from the module cover.
3. Complete the following in order to remove the fuel level sensor (1) from the module bucket:
1. Disengage the locking tabs on the sensor.
2. Slide the sensor upward from the bucket.
Installation Procedure