H3 V8-5.3L (2008)
Accelerator Pedal Position Sensor: Service and Repair
Accelerator Pedal Position Sensor Replacement
Removal Procedure
1. Remove the knee bolster bracket. Refer to Driver Knee Bolster Bracket Replacement (Left Hand Drive) (See: Body and Frame/Interior Moulding
/ Trim/Dashboard / Instrument Panel/Service and Repair/Driver Knee Bolster Bracket Replacement (Left Hand Drive))Driver Knee Bolster
Bracket Replacement (Right Hand Drive) (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Driver Knee Bolster Bracket Replacement (Right Hand Drive)) .
2. Disconnect the body wiring harness electrical connector from the accelerator pedal position (APP) sensor.
3. Remove the accelerator pedal/APP sensor nuts.
4. Remove the accelerator pedal/APP sensor from the vehicle.
Installation Procedure