H3 V8-5.3L (2008)
10. Install the rear and left front brake pipe fittings to the brake master cylinder.
Tighten the fittings to 19 N.m (14 lb ft).
11. Adjust the stop lamp switch. Refer to Stop Lamp Switch Adjustment (See: Lighting and Horns/Brake Light Switch/Adjustments) .
12. Bleed the brake system. Refer to Hydraulic Brake System Bleeding (Manual without RPO BRM) (See: Brakes and Traction Control/Brake
Bleeding/Service and Repair/Hydraulic Brake System Bleeding (Manual without RPO BRM))Hydraulic Brake System Bleeding (Manual with
RPO BRM) (See: Brakes and Traction Control/Brake Bleeding/Service and Repair/Hydraulic Brake System Bleeding (Manual with RPO BRM)
)Hydraulic Brake System Bleeding (Pressure without RPO BRM) (See: Brakes and Traction Control/Brake Bleeding/Service and
Repair/Hydraulic Brake System Bleeding (Pressure without RPO BRM))Hydraulic Brake System Bleeding (Pressure with RPO BRM) (See:
Brakes and Traction Control/Brake Bleeding/Service and Repair/Hydraulic Brake System Bleeding (Pressure with RPO BRM)) .