H3 V8-5.3L (2008)
4. Disconnect the brake fluid level sensor (1) electrical connector.
5. Disconnect the electrical connectors (2) and (3) at the brake pressure modulator valve (BPMV) and module assembly.
6. Remove the driver knee bolster bracket. Refer to Driver Knee Bolster Bracket Replacement (Left Hand Drive) (See: Body and Frame/Interior
Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Driver Knee Bolster Bracket Replacement (Left Hand Drive))Driver Knee
Bolster Bracket Replacement (Right Hand Drive) (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Driver Knee Bolster Bracket Replacement (Right Hand Drive)) .
7. Remove the retainer (1) from the clevis pin.
8. Remove the clevis pin (2) from the master cylinder pushrod and the brake pedal.
