H3 V8-5.3L (2008)
Steering Gear: Service and Repair
Steering Gear Boot Replacement - On Vehicle
Steering Gear Boot Replacement - On Vehicle
Tools Required
J 22610 Keystone Clamp Pliers
Removal Procedure
1. Remove the rack and pinion outer tie rod end. Refer to Rack and Pinion Outer Tie Rod End Replacement (See: Tie Rod/Tie Rod End/Service and
Repair) .
Important: Mark the location of the rack and pinion inner tie rod nut before removing it.
2. Remove the rack and pinion inner tie rod nut (2) from the rack and pinion inner tie rod (1).