H3 V8-5.3L (2008)
1. If installing a new steering wheel perform the following:
1. Ensure the front wheels are still set in the straight-ahead position.
2. Position the steering wheel near the steering shaft with the arrow (1) at the 12 o'clock position.
3. Ensure that proper tooth alignment between the steering wheel and the steering shaft has been achieved (2).
2. If installing the original steering wheel perform the following:
1. Position the steering wheel to the steering column.
2. Align the marks made during the removal of the steering wheel.
3. Ensure the electrical connectors (1,3) are not pinched between the steering column and the steering wheel.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
4. Install the steering wheel nut (2).