H3 V8-5.3L (2008)
2. Install a new rack and pinion inner tie rod nut in the same position as the old one.
3. Install the rack and pinion outer tie rod end to the rack and pinion inner tie rod.
4. Install the rack and pinion outer tie rod end to the steering knuckle.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
5. Install the new rack and pinion outer tie rod end nut.
Tighten the nut to 71 N.m (52 lb ft).
6. Tighten the rack and pinion inner tie rod nut against the rack and pinion outer tie rod end.
7. Install the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair) .
8. Adjust the front toe. Refer to Front Toe Adjustment (See: Alignment/Service and Repair/Front Toe Adjustment) .
