H3 V8-5.3L (2008)
Suspension Strut / Shock Absorber: Service and Repair
Front Suspension
Shock Absorber Replacement
Shock Absorber Replacement
Removal Procedure
Notice: The front shock absorbers of the vehicle are multifunctional. In addition to contributing to a smooth ride they also provide the only stop to the
front suspension when fully extended. Therefore, when servicing the shock absorber, service replacement shock absorbers must be equivalent to original
shock absorbers in both extended length and strength. Use of shocks not complying to original equipment or strength could result in suspension
over-travel or shock breakage. Suspension over-travel may result in suspension component breakage.
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Wheels and Tires/Vehicle Lifting/Service and Repair) .
2. Support the lower control arm with a suitable stand.
3. Hold the tennon end with a wrench while removing the nut.
4. Remove the nut.
5. Remove the upper insulator (1). Do not discard the plastic pilot ring (2).
