H3 V8-5.3L (2008)
13. Install the 1-2 accumulator inner and outer springs to the 1-2 accumulator cover.
14. Install the 1-2 accumulator piston onto the pin in the 1-2 accumulator cover.
Ensure that the piston legs face the accumulator cover.
15. Install the 1-2 accumulator cover and the accumulator cover retaining bolts.
Tighten the accumulator cover retaining bolts to 11 N.m (97 lb in).
*
RWD (1)
*
4WD (2)
16. Remove the J 25025-B from the transmission case.
17. Install the control valve body. Refer to Valve Body and Pressure Switch Replacement (See: Valve Body/Service and Repair) .
18. Install the transmission filter and oil pan. Refer to Automatic Transmission Fluid and Filter Replacement (See: Service and Repair/Removal and
Replacement/Automatic Transmission Fluid and Filter Replacement) .
Important: It is recommended that transmission adaptive pressure (TAP) information be reset.
Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, The ECM, PCM or TCM will need to
relearn TAP values. Transmission performance may be affected as new TAP values are learned.
19. Reset the TAP values. Refer to Transmission Adaptive Functions (See: Description and Operation/Transmission Adaptive Functions) .
