hummer Workshop Repair Guides

Hummer Workshop Service and Repair Manuals

ABOUT US
Wheel Drive Shaft Inner Joint and Boot Replacement|Page 9082 > < Wheel Drive Shaft Inner Joint and Boot Replacement|Page 9080

H3 V8-5.3L (2008)

Page 5
background image

15. Install a new large retaining clamp. Crimp the large retaining clamp using the pliers J 35566  (1).

Tighten the large retaining clamp to 176 N.m (130 lb ft).

16. Fully stroke the D/O joint several times to disperse the grease.
17. Install the wheel drive shaft. Refer to Wheel Drive Shaft Replacement  (See: Service and Repair) .

Wheel Drive Shaft Inner Joint and Boot Replacement|Page 9082 > < Wheel Drive Shaft Inner Joint and Boot Replacement|Page 9080