H3 V8-5.3L (2008)
4. Shift lever to LOW.
5. Install the screw at the rear of the shiftier assembly.
Tighten the actuator screw to 1.65 N.m (15 lb in).
6. Connect the electrical connector (3).
Important: After assembling the shift lock actuator, turn the ignition forward but do not start (auxiliary position) and attempt to pull the
lever from PARK with or without the brake pedal depressed to verify there is no gear access without the brake pedal depressed.
Important: Ensure the key cannot be removed from the ignition unless both the shifter is in PARK and the shift knob button has been
depressed.
7. Verify the shift lock actuator functions properly.
8. Install the shifter knob and boot to the console upper trim plate.
9. Install the shifter knob and console upper trim plate. Refer to Floor Shift Control Knob Replacement (See: Automatic
Transmission/Transaxle/Shifter A/T/Service and Repair/Floor Shift Control Knob Replacement) .
