hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Hood Sensor/Switch (For Alarm) > < Alarm Module, (Vehicle Antitheft)|Locations|Page 7096
Page 4
background image

During alarming, in case that door warning switch (key in) is ON and then IGN1 and IGN2 are both ON for 30 sec continuously, the alarm is
cancelled, and the system enters the disarm state. After alarming, in case that door warning switch (key in) is ON and then IGN1 and IGN2 are
both ON for 30 sec continuously, the alarm is cancelled, and the system enters the disarm state.

5. ALARM STATE IN POWER DOWN

If the battery is disconnected to the ETACS module in the following states:
-

Alarm

-

After alarming

Upon restoring the battery, the alarm state shall be entered and the alarm cycle shall restarted (timer reset to 0).
Upon restoring the battery, the alarm state shall be entered and the alarm cycle shall restart (timer reset to 0).

Hood Sensor/Switch (For Alarm) > < Alarm Module, (Vehicle Antitheft)|Locations|Page 7096