hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Power Mirror Motor > < Diagram Information and Instructions|Page 7316
Page 1
background image

Heated Element: Description and Operation

Circuit Description

With TACS

Battery voltage is supplied to the rear window defogger timer at all times from fuse 9. When the engine is running, battery voltage is also supplied from
the generator to the solid state controller. Depressing the rear defogger switch (when the engine is running) momentarily grounds the on/off input
terminal of the timer and the solid state controller turns on the rear window defogger, Left/Right power outside mirror defogger and the rear defogger
indicator. The solid state controller will turn the rear defogger off after approximately 20 minutes. Depressing the rear defogger switch when the rear
defogger is on causes the timer to turn the rear defogger off.

With ETACS

Battery voltage is supplied to the defogger relay coils and contacts at all times from fuse 9 and battery voltage is also supplied from the generator to the
ETACM when the engine is running. The rear defogger switch on (depressing) signal is provided to the ETACM and then ETACM provide ground to
the defogger relay coil. Fuse 9 supply battery voltage to the rear window defogger and Left/Right power outside mirror defogger through defogger relay
contacts. The ETACM will turn the rear defogger off after approximately 20 minutes. Depressing the rear defogger switch when the rear defogger is on
causes the ETACM to turn the rear defogger off.

Power Mirror Motor > < Diagram Information and Instructions|Page 7316