Accent L4-1.6L (2003)
6. Remove the lower shoe spring and upper shoe spring. Disconnect the parking cable from the operating lever.
INSPECTION
1. Measure the inside diameter of the brake drum. Check the runout of the brake drum by using a dial indicator.
Inside diameter mm (inch)
Standard value: 180 mm (7.09 inch)
Service limit: 182 mm (7.17 inch)
Out-of-round (brake drum) mm (inch)
Service limit: 0.05 mm (0.002 inch)
2. Measure the brake shoe lining thickness.
Lining thickness mm (inch)
Standard value: 4.8 mm (0.19 inch)
Service limit: 1 mm (0.04 inch)
3. Inspect the brake lining and drum for proper contact.
4. Inspect the wheel cylinder outside for excessive wear and damage.
5. Inspect the backing plate for wear or damage.
INSTALLATION
