Accent L4-1.6L (2003)
Electronic Brake Control Module: Service and Repair
ANTI-LOCK BRAKING SYSTEM CONTROL MODULE
REMOVAL
1. Remove the air-cleaner and the intake hose.
2. Disconnect the double lock connector from the HECU.
3. Disconnect the brake tubes from the HECU.
NOTE:
^
Do not spill brake fluid on the vehicle; it may damage the paint. If brake fluid gets on the paint, wash it off immediately with water.
^
Take care not to damage or deform the brake lines during removal and installation.
^
To prevent the brake fluid from flowing, plug and cover the hose ends and joints with a shop towel or equivalent material.
