Accent L4-1.6L (2003)
Thermostat: Service and Repair
THERMOSTAT
THERMOSTAT
INSPECTION
1. Drain the coolant so its level is below thermostat.
2. Remove the inlet fitting and gasket.
3. Remove the thermostat.
4. Immerse thermostat in hot coolant to check proper valve opening temperature. Replace if necessary.
Valve opening temperature:.....82°C (177°F)
Full opening temperature:.....95°C (205°F)
COOLANT TEMPERATURE SENSOR
1. Heat the sensor by submerging it in hot engine coolant.
2. Check that the resistance is within the specified range.