Accent L4-1.6L (2003)
Compressor Clutch Coil: Service and Repair
CLUTCH FIELD COIL
1. Clean the front head coil mounting portion.
2. Place the compressor vertically and put the coil in position of compressor front head.
Check the electric connector of clutch coil is located in position.
3. Place the coil compression tool in the compressor nose and the center of field coil.
4. Place two 8 inch pullers on the compressor and compression tool. The jaws of puller should deeply hold the front mounting portion of compressor,
then the screw should be located in the central position of the compression tool.
5. Using a wrench, tighten the screw so as to securely seat the coil on the compressor front head.
6. Install the clutch pulley and hub on the compressor.