Accent L4-1.6L (2003)
Fluid - A/T: All Technical Service Bulletins
A/T - Automatic Transaxle Fluid Level
Group: TRANSMISSION
Number: 06-40-016
Date: NOVEMBER, 2006
Model:
ALL
Subject:
AUTOMATIC TRANSAXLE FLUID LEVEL
This TSB supersedes TSB # 03-40-019 to add new model information
DESCRIPTION:
The automatic transaxle fluid (ATF) level must be checked during Pre-Delivery Inspection (PDI). Low ATF level may cause the following driveability
conditions:
^
Engine "flare" during the 2-3 shift (engine speed increases during the shift) at light throttle when the ATF is cold
^
Harsh or delayed shift during acceleration from a stop following a rapid deceleration
PROCEDURE:
1.
Attach a Hi-Scan Pro or GDS and select "Automatic Transaxle" menu, "Current Data" menu and "Fluid Temperature".
2.
Drive the vehicle until the ATF is at normal operating temperature above 75°C (167°F).
3.
Park the vehicle on a level surface and set the parking brake. Start the engine and move the shift lever through each gear, then to "Neutral".
4.
Check the ATF level on the dipstick. Add Hyundai SPIII until the level is within the "HOT" or "75C" range.
NOTE:
The 2008 Veracruz requires JWS 3309, Type T-IV ATF. Do not use SPIII.
