Accent L4-1.6L (2003)
^
Move the gear selector switch of the A/T Tester to 1, 2, 3, 4 and 5 (if equipped) and perform a stall test in each gear.
^
Use EF.XG knob for 1999~ Sonata, 2001~ Elantra, Santa Fe & XG, 2003~ Tiburon
^
Use LC knob for 1999~ Accent, 1999-2000 Elantra & 1999-2002 Tiburon
^
Refer to the appropriate shop manual for stall test specifications.
^
Disconnect the A/T Tester. Delete any solenoid DTC induced by the A/T Tester.
^
Test drive the vehicle for two key-on to key-off driving cycles when the ATF is hot (above 158°F or 70° C). Drive the vehicle under similar
conditions as reported by the customer. Perform several 1-2-3-4 upshifts and 4-3-2-1 downshifts. Repair as shown.
