hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

SRS - Repair After Collision|Page 7008 > < SRS - Repair After Collision|Page 7006
Page 1
background image

Impact Sensor: Description and Operation

SATELLITE SENSOR

The release system for the side airbag consists of a SRSCM installed in the middle of the vehicle and two satellites - one on the left-hand side and one on
the right. Only the SRSCM is capable of deploying the airbags or the seat-belt pretensioners systems in the vehicle. In the dialog between the SRSCM
and the satellite, it is the SRSCM that makes the deployment decision.

The SRSCM is supported with the side airbag function by two satellites, which act as intelligent acceleration sensors and as such back up the central
airbag controller. Both the satellites continuously report the system status on the left and right-hand sides of the vehicle to the SRSCM.

It monitors the acceleration sensor continuously. The test results are reported to the SRSCM by means of periodic status signals.

WARNING: When the ignition is ON, never cause a sudden shock around the installation area of the satellite sensor by a hammer, etc.
Otherwise it could cause the airbag system to unexpectedly deploy during servicing.

SRS - Repair After Collision|Page 7008 > < SRS - Repair After Collision|Page 7006