Accent L4-1.6L (2003)
Impact Sensor: Service and Repair
REMOVAL
1. Disconnect the negative battery cable and keep secure from battery.
CAUTION: Wait at least 30 seconds after disconnecting the battery cable before doing any further work.
2. Remove the door scuff trim.
3. Remove the lower anchor plate.
4. Remove the center pillar lower trim.
5. Remove the seat belt assembly.
6. Disconnect the satellite sensor connector and remove the satellite sensor.
TORQUE : 8 - 10 Nm (80 - 100 kg-cm, 6 7.4 lb-ft)
