Accent L4-1.6L (2003)
4. Attach a GDS and select vehicle, "A/T" menu, "Current Data" and "Shift Lever Switch".
5. Move the shift lever and confirm the GDS reads the gear shift position as shown above. If so, the harness currently does not have an open or short
circuit between. the PCM/TCM and range switch.
6. Move the shift lever to "N".
7. Insert a 5mm drill or M5 (5mm) bolt in the adjustment hole of the range switch. Check that the drill or bolt fits into the adjustment holes.
^ If so, go to Step 8
^ If not, go to Step 11
8. Inspect the connector to the range switch for a bent pin or pin not fully inserted and related wiring for an open or short circuit. If OK, follow the repair
procedure below:
